Jäspi H, HA

Hansa Heiztechnik GmbH
The HANSA Jäspi are equipped with the necessary installation accessories in the factory: this ensures top
quality and short installation times.

Includes:
Heating control, expansion vessel, heating circuit pump, changeover valve and safety valve and heated condensation discharge pipe.

Energielabel Wärmepumpe
Two models are available to choose from:
1. Jäspi H: The optimum monoblock heat pump in output sizes 6 kW, 8kW and 12 kW up to outdoor temperatures of -20°C and a max. fl ow temperature of 58°C.
and
2. Jäspi HA: The premium monoblock heat pump in output sizes 8 kW, 12 kW and 16 kW up to outdoor temperatures of – 25°C and a maximum fl ow temperature of 65°C, optimised for more output at low outdoor temperatures.

The HANSA monovalent air to water heat pump in monoblock design for effi cient and sustainable living space heating and water heating. The HANSA Jäspi series heat pumps use the solar heat of the environment for heating and hot water operation. The heat pumps are designed for use in new build as well as for setting up bivalent heating systems with the existing oil and gas heating appliances. The Jäspi heat pumps can be connected to underfl oor heating (recommended) as well as radiators (bivalent).

The Jäspi heat pump consists of two units:
A complete, ready to connect hydraulic unit for indoor installation. The hydraulic unit consists of hot water storage tank, electric heating element 9W, buffer tank, system control for outside temperature compensated living space heating and demand-controlled water heating and includes all required pumps and changeover valves. The outdoor unit is an air to water heat pump module in monoblock design, which forwards the “collected” environmental heat to an indoor unit, which ensures heating operation and water heating.

 

HANSA Jäspi heat pump packages

Packages Energy efficiency class Order No. Price/€
JÄSPI TEHOWATTI H-6 heat pump
6 kW / 215 litre
1004401 a.A.
JÄSPI TEHOWATTI H-8 heat pump
8 kW / 215 litre
1004402 a.A.
JÄSPI TEHOWATTI H-12 heat pump
12 kW / 215 litre
1004349 a.A.
JÄSPI TEHOWATTI HA-8 heat pump
8 kW / 215 litre
1004404 a.A.
JÄSPI TEHOWATTI HA-12 heat pump12 kW / 215 litre 1004350 a.A.
JÄSPI TEHOWATTI HA-16 heat pump16 kW / 215 litre 1004406 a.A.

Prices are net prices plus statutory VAT.

Advantages at a glance

» Sustainable energy cost savings,
   environmentally friendly and ready
   for installation
» Environmentally friendly due to
   clean and CO2-free- environmental
   heat. The consumption of fossil
   fuels and CO2 emissions are
   reduced.
» Ready to connect complete
   package consisting of hydraulic
   unit (indoors) and heat pump
   (outdoors).
» Output sizes 6 kW to 16kW
» two series of heat pump units
» Maximum output with minimum
   energy use
» The inverter controlled compressor
   supplies heat with precision to the
   nearest degree and with metered
   energy use.
» An electrical heating element
   ensures adequate heat even in
   frost conditions
» If the heat drawn from the
   outdoor air is insufficient at below
   zero temperatures, an electric
   heating element is connected
   automatically, so that it can be
   heated at any time
» Efficient heat for new and
   existing buildings!

Infocenter

» Technical data (PDF)
» Packages (PDF)